PRZOOM - /newswire/ -
Tulsa, OK, United States, 2009/03/04 - The Time Mark Model 42A Pump Controller is a versatile and advance liquid level/pump management system. The Model 42A can control up to 3 pumps with a 4-20mA input or 2 pumps with a 4-20mA input and backup floats.
Alarm inputs for seal failure, over temp, contactor fail and a spare (ex. 2nd seal fail) and an alarm output relay are provided.
The graphic display shows current depth, a liquid level graph with set-points, date/time and alarm status. Four buttons allow access to configuration settings (password protectable), pump status with run time meters, alarm status and real time alarm event logs with alarm type, date & time.
Alternation functions are built-in, and both 4-20mA input and retransmission 4-20mA output are scalable. The Model 42A comes standard with serial communications via RS-232 or RS-485 and a USB port reserved for configuration.
For more information on this product, please call a Time Mark sales representative or visit Time Mark's website.
MODEL 42A Specifications:
Display: Graphic 128 x 64 pixels.
Control/Alarm Relays: 4-SPDT (form C), 10A [.] 240 VAC (Resistive)
Inputs: 4-20mA, floats or 4-20mA w/ fail to floats (4-20 mA is scalable)
Retransmission: Isolated 4-20mA (scalable)
Loop Power: 12VDC, 20mA
Memory: Non-volatile stored for 10 years without power.
Power: 24Vdc; 120VAC to 24Vdc transformer included.
Operating Conditions: -20° to 70°C
Data Logging: Real time clock provides event logs with pump status, alarm type, date and time.
Serial: RS-232 or RS-485. RS-485 used for connection to Model 42X expansion pump controller.
USB: Reserved for configuration; future expansion.
Mounting: Wall mount, DIN rail mount, or panel mount.
Agency Approvals: Pending.
Enclosure Material: ABS plastic.
Weight: 1 lb.
About Time Mark Corporation
Time Mark Corporation (time-mark.com) are manufacturers of 3-Phase monitors, current monitors, voltage sensors, pump and liquid level controls, alternating relays, and Signaline timing devices.